feliciavox
onlyfans
KDA EVELYNN MORE VIDEO FROM LOL PROGRESS I finished taping ..
🕑 Added 2020-12-23 22:54:02 +0000 UTC KDA EVELYNN MORE VIDEO FROM LOL PROGRESS I finished taping up the back portion of the wire frame to give it some stability and so there’s no sharp edges with some duct tape. I also added elastic shoulder straps and a partially elastic chest band so that the wire frame lays flat against my body. I hand sewed all the straps onto the wire frame. Before adding the foam pieces for the lashers onto the wire frame, I cut out and sewed together the fabric sleeve for the lashers. I left the ends open so that I could slip it onto the wire frame before adding the foam pieces. I then glued the foam pieces onto the wire using hot glue after soldering a gap for the wire into the foam, and covered the wire and gap with 2 mm foam with contact cement to give it a firm hold. After I was done attaching both foam lashers to the wire frame, I rolled down the fabric cover sleeves that were already on the wire frame to cover the foam (the sleeves are actually reversed in the photos, the shiny scale fabric should be on the inner side of the lashers but I can easily flip it over). I’ll likely be adding some hook and eye closures or Velcro to the top of the sleeve so it doesn’t slip off, and some Velcro to the bottom to keep the fabric cover taut. Almost finished!
